Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS Stock No.:
- 130-0875
- Mfr. Part No.:
- XY2CEDA196H7
- Manufacturer:
- Telemecanique Sensors
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 130-0875
- Mfr. Part No.:
- XY2CEDA196H7
- Manufacturer:
- Telemecanique Sensors
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Minimum Operating Temperature | -25°C | |
| E-Stop Button | Yes | |
| Contact DC Voltage | 130V dc | |
| Reset Button | Yes | |
| Contact AC Voltage | 130V ac | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 70°C | |
| Depth | 142mm | |
| Width | 106 mm | |
| Length | 285mm | |
| Standards/Approvals | CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | |
| Housing Material | Stainless Steel | |
| Hazardous Area Certification | ATEX | |
| Conduit Entry | 1/2 in NPT | |
| Mechanical Life | 60000Cycles | |
| Select all | ||
|---|---|---|
Brand Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Minimum Operating Temperature -25°C | ||
E-Stop Button Yes | ||
Contact DC Voltage 130V dc | ||
Reset Button Yes | ||
Contact AC Voltage 130V ac | ||
Contact Current 3A | ||
Maximum Operating Temperature 70°C | ||
Depth 142mm | ||
Width 106 mm | ||
Length 285mm | ||
Standards/Approvals CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | ||
Housing Material Stainless Steel | ||
Hazardous Area Certification ATEX | ||
Conduit Entry 1/2 in NPT | ||
Mechanical Life 60000Cycles | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Related links
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm, Right Side
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC
- Telemecanique Sensors XY2 Rope Pull Switch