SKF 32940 200mm I.D Taper Roller Bearing, 280mm O.D

This SKF bearing features tapered rollers and rings (or raceways) and provides an effective solution when you need to accommodate simultaneous thrust and radial loads. Its optimised design and surface finish promote lubricant film formation. This means friction is reduced during rotation, which increases durability and extends the unit's working life. It also helps the bearing run quietly. Thanks to this reliably long service life, you don't need to replace the bearing as frequently as some alternatives. Separable, interchangeable components make maintenance and inspection easy.

• Parallel bore type
• Compact structure
• Low maintenance, noise and vibration
• Inside diameter of 200 mm
• Outside diameter of 280 mm
• Race width of 54.18 mm

• Electric motors
• Fans
• Gearboxes
• Pumps

The static load rating for bearings is the maximum load they can hold before suffering damage. Exceeding this limit creates undue contact stress on the most heavily-loaded rolling element (the raceway) and will cause permanent deformation. Choosing the correct bearing for the required load is vital.