FAG NJ207-E-XL-TVP2-C3 35 mm ID Roller Bearing, 72 mm OD
- RS Stock No.:
- 194-7337
- Mfr. Part No.:
- NJ207-E-XL-TVP2-C3
- Manufacturer:
- FAG
This image is representative of the product range
Subtotal (1 unit)*
PHP4,363.54
(exc. VAT)
PHP4,887.16
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per Unit |
|---|---|
| 1 + | PHP4,363.54 |
*price indicative
- RS Stock No.:
- 194-7337
- Mfr. Part No.:
- NJ207-E-XL-TVP2-C3
- Manufacturer:
- FAG
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 35 mm | |
| Race Width | 17mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 59kN | |
| Outside Diameter | 72 mm | |
| End Type | Open | |
| Static Load Rating | 50kN | |
| Select all | ||
|---|---|---|
Brand FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 35 mm | ||
Race Width 17mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Dynamic Load Rating 59kN | ||
Outside Diameter 72 mm | ||
End Type Open | ||
Static Load Rating 50kN | ||
Single row cylindrical roller bearings with cage are suitable where:
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Related links
- FAG NJ207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- INA N207-E-XL-TVP2-C3 35 mm ID Roller Bearing, 72 mm OD
- FAG NJ2306-E-XL-TVP2-C3 30 mm ID Roller Bearing, 72 mm OD
- RS PRO NJ207-E-TVP3-C3 35 mm ID Roller Bearing, 72 mm OD
- FAG NJ306-E-XL-TVP2-C3 30 mm ID Cylindrical Roller Bearing, 72 mm OD
- FAG NU207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- FAG NUP207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- INA N207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD