Solar Technology 12 V Solar Charge Controller

Battery reverse feed protection
Overload protection
Battery open circuit protection
Lightning surge protection
Deep discharge protection
Charge current protection up to 4A (rs 706-7934)
Charge current protection up to 8A (rs 706-7943)
Charge current protection up to 12A (rs 769-4258)
Charge current protection up to 20A (rs 769-4251)
Charge current protection up to 30A (rs 769-4255)

All solar panels (except the 5w &10W) require a voltage regulator to ensure that the battery is not overcharged.
We recommend the STS01204 (rs7067934) for the 18w, 28w. 43w and 60w panels or STS01208 (rs706-7943) for the 80w and 120w panels.
STSPR10 for the 150w panel and installations up to 180watts (rs 7694258), STSPR20 for installations up to 300watts (rs 7694251), STSPR30 for installations up to 450watts (RS 7694255)

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.