ROHM BD1LBU50EFJ-CE2 Low Side, Low Side Power Switch IC 8-Pin, HTSOP-J8
- RS Stock No.:
- 265-5387
- Mfr. Part No.:
- BD1LBU50EFJ-CE2
- Manufacturer:
- ROHM
This image is representative of the product range
Bulk discount available
Subtotal (1 pack of 5 units)*
PHP342.95
(exc. VAT)
PHP384.10
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per Unit | Per Pack* |
|---|---|---|
| 5 - 45 | PHP68.59 | PHP342.95 |
| 50 - 95 | PHP66.532 | PHP332.66 |
| 100 - 245 | PHP62.54 | PHP312.70 |
| 250 - 995 | PHP56.912 | PHP284.56 |
| 1000 + | PHP50.082 | PHP250.41 |
*price indicative
- RS Stock No.:
- 265-5387
- Mfr. Part No.:
- BD1LBU50EFJ-CE2
- Manufacturer:
- ROHM
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ROHM | |
| Product Type | Power Switch IC | |
| Power Switch Topology | Low Side | |
| Power Switch Type | Low Side | |
| Switch On Resistance RdsOn | 0.35Ω | |
| Number of Outputs | 1 | |
| Package Type | HTSOP-J8 | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -55°C | |
| Operating Current | 1mA | |
| Maximum Operating Temperature | 150°C | |
| Height | 1mm | |
| Length | 6mm | |
| Width | 4.9 mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q100 | |
| Series | BD1LBU50EFJ-C | |
| Select all | ||
|---|---|---|
Brand ROHM | ||
Product Type Power Switch IC | ||
Power Switch Topology Low Side | ||
Power Switch Type Low Side | ||
Switch On Resistance RdsOn 0.35Ω | ||
Number of Outputs 1 | ||
Package Type HTSOP-J8 | ||
Pin Count 8 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -55°C | ||
Operating Current 1mA | ||
Maximum Operating Temperature 150°C | ||
Height 1mm | ||
Length 6mm | ||
Width 4.9 mm | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q100 | ||
Series BD1LBU50EFJ-C | ||
The ROHM BD1LB500 Series is an in-vehicle with 1ch low side switch. This switch builds in the overcurrent limiting circuit, thermal shutdown circuit, open load detection circuit and under voltage lock out circuit. It also provides the diagnostic output circuit when an abnormality is detected.
Low standby current
Built in under voltage lock out circuit
Built in open load detection circuit
Built in diagnostic output (ST) terminal
Built in overcurrent limiting circuit