Omron Non-Latching Relay, 230V ac Coil, 5A Switching Current, DPST

This non-latching relay is a Compact electromechanical switching device intended for control and signal applications in automation and electrical systems. It operates from an AC Coil and provides double-pole single-throw switching using silver-alloy contacts, making it suitable for general-purpose switching where momentary changeover is required. The relay is designed for plug-in installation and for use in environments where moderate ambient temperatures are expected.

• 230V AC Coil delivering 900mW power for low-energy drive requirements
• DPST contact arrangement enabling simultaneous control of two circuits
• Silver-alloy contacts rated for 5A to handle moderate load currents
• Contact resistance of 100mΩ minimising voltage drop in closed state
• Switching capability up to 440V AC to accommodate higher-voltage circuits
• Coil resistance of 172Ω for predictable drive current and control sizing

• Suitable for industrial control panels requiring dual-circuit switching
• Ideal for automation sequences where non-latching actuation is needed
• Used with control transformers and contactor logic in machinery
• Can be used for signal isolation in measurement and sensing racks
• Suitable for retrofit into existing plug-in relay racks in electrical cabinets

It employs plug-in terminals designed for quick insertion into compatible relay sockets to simplify replacement and wiring changes.

It is specified to operate down to -40°C and up to 70°C, supporting deployment in cold stores and typical industrial indoor environments.

The contacts can switch up to 150W of power and are rated for switching DC voltages up to 125V.

The relay has a Compact footprint with a width of 13mm, length of 29mm and height of 35.5mm to aid dense mounting.

The component conforms to RoHS requirements, meeting restrictions on certain hazardous substances.