Process Control and Automation Solution

The STMicroelectronics STEVAL-IOD04KT1 is a reference design kit that exploits the features of the L6364W IO-Link dual-channel device transceiver. STEVAL-IOD04KT1 IMAGE The kit consists of the STEVAL-IOD004V1 main board, the STLINK-V3MINI programmer and debugger tool, a 14-pin flat cable, and an M8 to M12 standard industrial connector adapter. The kit acts as a modern smart industrial sensor to be connected to a master IO-Link hub (or a suitable PLC interface). The power supply for the MCU, sensors, and other logic devices derives from the DC-DC converter controller embedded in the L6364W. The on-board STM32G071EB microcontroller runs an IO-Link demo stack v.1.1, which controls the IO-Link communication, and the software code that manages the L6364W transceiver and the MEMS industrial sensors.

Four-pole M8 industrial standard connector
Jumpers for CQ and DIO selection in independent or joint mode
Switch for transmission mode selection
10-pin connector for sensor expansion options
Operating voltage range 7 to 32 V

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.