The STEVAL-GLA001V1 evaluation board allows insulated control of three AC loads up to 1 kW (230 Vrms) with Triacs and AC switches (instead of relay solutions), particularly suitable for residential appliances. The board must be controlled with an STM32 microcontroller embedded on an NUCLEO-F030R8 STM 32 Nucleo development board, or other microcontroller supplied by the user.
If you are using an STM32 Nucleo development board, three AC switch control modes are available for load control: continuous or pulse gate current, timer option and phase control. The STSW-GLA001V1 firmware is available for free download and easily programmable through a PC interface on a USB bus. The main parameters can be adjusted through a common interface like HyperTerminal, without needing to edit the MCU firmware.
The hardware is designed to offer a wide input voltage range, low standby power losses and two low voltage power supplies.

Select all	Attribute	Value
	Brand	STMicroelectronics
	For Use With	Triac and AC Switch Insulated Control
	Kit Classification	Evaluation Board
	Featured Device	STM32
	Kit Name	Evaluation Board

	Select all
	Brand STMicroelectronics
	For Use With Triac and AC Switch Insulated Control
	Kit Classification Evaluation Board
	Featured Device STM32
	Kit Name Evaluation Board

STMicroelectronics Evaluation Board for STM32 for Triac and AC Switch Insulated Control

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Related links