Festo Pneumatic Guided Cylinder - 170870, 40mm Bore, 200mm Stroke, DFM Series, Double Acting

Get set to bring your goods into line with this pneumatic guided cylinder from Festo. Its four plain bearings stand up to heavy loads, keeping even large products flowing through your system. With its built-in guide block that spreads forces across its piston rods, the unit cuts the wear on its moving parts so it works harder for longer. There's no need to worry about disruptive noise thanks to handy elastomer cushioning at each end of the barrel. Double-acting operation means the cylinder uses air to drive the piston in both directions, so you can be sure of smooth operation.

• Stroke length of 200mm to cover long distances in handling systems
• Reaches drive speeds up to 0.8m/s, helping it power through fast-moving tasks
• Supports both clean and lubricated compressed air to suit different processes
• Standard G1/8 thread pneumatic connection works with commonly used equipment

• Assembly lines
• Processing plants
• Construction industry

Yes, this cylinder works in operating temperatures between -20°C and +80°C, so it's a safe bet for harsh industrial environments.