Festo 2 Finger Double Acting Action Pneumatic Gripper, HGRT-25-A, Radial Gripping Type

This pneumatic gripper is a compact, two-finger radial end effector designed for automated pick-and-place tasks in industrial settings. It operates using pneumatic actuation to open and close its gripping fingers and is intended for integration with mechanised systems and robotic arms where controlled radial gripping is required.

• 25mm bore delivers consistent gripping force suitable for small components • Double-acting design enables controlled extension and retraction during cycles • Peak operating pressure 8 bar supports firm part retention under load • Maximum cycle rate 3 Hz allows for moderately Rapid handling operations • Rated temperature range 5-60 °C permits use across typical factory environments • M5 ports provide Compact pneumatic connections for streamlined tubing runs

• Suitable for robotic pick-and-place of electronic components on assembly lines • Ideal for automated handling of small mechanical parts in machine cells • Used with pneumatic tool-changers for quick end-effector swaps • Can be used for repetitive insertion or removal tasks in test fixtures

It employs two opposing fingers arranged radially to clasp round or flat parts from the sides.

The device itself has a mass of 540 g, which should be included in the total end-effector payload calculation.

The unit conforms to RoHS restrictions concerning hazardous substances used in its manufacture.

Supply tubing should terminate at M5 threaded ports for proper sealing and flow control.