Norgren Pneufit C Series Threaded In-line Regulator, M5 Inlet Port, 推入式 6mm Tube Inlet Port x 推入式 6mm Tube Outlet Port

Control your pneumatic system's pressure with this banjo-type in-line regulator from IMI Norgren. It maintains constant outputs by regulating different inputs to help support reliable performance. You can achieve fast installation without needing tools, thanks to the M5 threaded inlet and 6mm push-in tubing ports. The nickel-plated brass construction resists corrosion for an extended service life, while silicon-free NBR seals create an airtight network to maximise compression and flow. For versatility, a releasable stainless steel grab-ring firmly attaches nylon or polyurethane hoses.

• Pre-applied thread sealant ensures rapid sealing and reduces installation time
• Wide operating temperature range between -20°C and +60°C for use in challenging conditions

• Factory automation systems
• Medical equipment
• Dental practices

The body is made of PBT for high strength and resistance to chemicals.

A regulator like this one cuts off the flow of compressed air when set limits are reached. This means it detects changes to flow loads and adjusts these to maximise the use of pressurised gases and not waste them.