Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SMC
	Product Type	Pneumatic Filter
	Filtration Size	0.3μm
	Port Size	1/4 in
	Connection Thread Standard	G
	Series	AFM
	Maximum Flow Rate	275L/min
	Maximum Operating Pressure	10 bar
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	+60°C
	Standards/Approvals	No
	Bowl Material	Polycarbonate

	Select all
	Brand SMC
	Product Type Pneumatic Filter
	Filtration Size 0.3μm
	Port Size 1/4 in
	Connection Thread Standard G
	Series AFM
	Maximum Flow Rate 275L/min
	Maximum Operating Pressure 10 bar
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature +60°C
	Standards/Approvals No
	Bowl Material Polycarbonate

COO (Country of Origin):: JP

SMC AFM Series Pneumatic Filter, 1/4 in Port size, 0.3μm Filtration size - AFM20-F02-D

This pneumatic filter provides particulate and mist separation for compressed Air systems in industrial automation. Designed for line mounting with a G-thread 1/4 in port, it serves to protect downstream equipment by removing fine contaminants and entrained oil from Air supplies while operating across typical workshop ambient temperatures.

Features & Benefits

• 0.3 μm nominal element for fine particulate removal
• Maximum operating pressure 10 bar enabling robust system resilience
• Maximum flow 275 L/min supports moderate-flow pneumatic circuits
• Polycarbonate bowl offers clear Visual oil and water inspection
• Steel bowl guard protects the transparent container in industrial settings

Applications

• Suitable for pneumatic control valves and actuators in assembly lines
• Ideal for instrumentation Air supplies in electronics manufacturing
• Used with compressed Air tools in maintenance workshops
• Can be used for preparatory filtration upstream of lubrication units

What is the drain capacity and how does it affect maintenance?

The bowl collects condensate with an 8 cm³ drain capacity, reducing service frequency for low-condensate applications and simplifying manual drainage procedures.

Which temperature limits should be observed during installation?

Operate the unit where ambient and medium temperatures remain between -5 °C and +60 °C to prevent freezing and material degradation.

How is pressure measured or indicated on the unit?

The product is supplied with a pressure unit nameplate and gauge calibration in MPa for system pressure referencing.

What proof pressure is the component designed to withstand?

The construction is rated to a proof pressure of 1.5 MPa to tolerate transient overpressure events during system commissioning or fault conditions.

SMC AFM series 0.3 μm 1/4 in 10 bar Pneumatic Filter 275L/min max

FREE delivery for orders over ₱3,000.00