Festo Ball type Pneumatic Actuated Valve, 8.4 bar, EN 10226-1, Female Rp1/4

This pneumatic-actuated valve is a two-way ball valve configured for pneumatic actuation and intended to control flow in process systems. It combines a brass ball body with a swivel drive and is designed for installation in any orientation, providing automated shut-off or modulation where compressed-air actuation is required. The unit connects to process piping using female threaded ports and operates within typical industrial ambient temperatures.

• Direct-action operation delivers Rapid valve response and simple control
• Rated for operating pressures up to 8.4 bar for pressurised systems
• Female Rp1/4 inlet with EN 10226-1 thread ensures standardised connection
• 1/4 in female outlet with R thread enables threaded downstream fitting
• Suitable for medium temperatures down to -20°C for cold processes
• Corrosion classification CRC1 reduces concern in low-corrosion environments

• Suitable for automated isolation in compressed-air networks
• Ideal for integration with pneumatic actuators on plant valves
• Used for controlling service media within industrial process lines
• Can be used for cold-temperature down to -20°C
• Used where brass valve bodies are preferred for compatibility

The valve body is manufactured from brass and contains PWIS substances.

It accepts pneumatic actuation and can also be configured for electrical actuation.

The nominal pressure rating for the process valve is PN40.

It mounts using CNOMO interfaces and has internal female threading for process connection.

The valve has a nominal diameter of DN15 and a product mass of 1,300 g.