Schneider Electric Modicon X80 Series PLC I/O Module for Use with M340 Series, Analogue

Looking for a PLC I/O module to quickly convert analogue signals for your system? Choose this environmentally friendly option from Schneider Electric. It has 4 analogue signal inputs for an array voltages up to 5V and currents up to 20mA, making it a versatile choice. A nominal read cycle time of five milliseconds across four channels means that this is a fast and effective way to convert analogue signals. The module is free from noise and emissions, to improve your working environment.

• Provides analogue/digital conversion capabilities of 24bits, suitable for most industrial automation applications
• Internal conversion resistor is precise to 0.1% – 15ppm/°C, which ensures high conversion capacity
• Sustainable choice, with 77% of the components being fully recyclable
• Designed for easy integration with the M340 series

• Industrial automation
• Automotive assembly lines
• Electronics manufacturing

An I/O module is a communication interface that's used alongside a PLC. It handles information sent to the PLC and receives commands that are sent from the processor.

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness