Schneider Electric Modicon X80 Series PLC I/O Module for Use with M340 Series, Discrete, Transistor, 240 V

Use this PLC I/O module from Schneider Electric to link a central processing unit to machines in your automated system. For easy integration, it's fully compatible with the Modicon M340 series. The versatile unit has 32 outputs, so you can make multiple connections with one device, which boosts your productivity and simplifies your setup. A voltage rating of 24V DC means this is a suitable option for use with low-powered systems.

• 3.6W power dissipation capability means reduced risk of overheating, minimising disruption
• Allows for paralleling of up to 3 outputs for efficient packing
• Response time of 1.2ms on output means fast processing of signals
• High mean time between failures of over 300,000 hours makes this a reliable choice
• Four LEDs clearly provide immediate status information, for enhanced monitoring

• Industrial automation
• Machine building
• Assembly lines

The module is protected against damage from reverse polarity by a reverse-mounted diode. It's also protected against short-circuits, overloads and overvoltage, so you can rely on it for consistent performance.

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness