FTDI Chip Multiprotocol Transceiver 16-Pin QFN
- RS Stock No.:
- 200-1778P
- Mfr. Part No.:
- FT230XQ-T
- Manufacturer:
- FTDI Chip
This image is representative of the product range
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 200-1778P
- Mfr. Part No.:
- FT230XQ-T
- Manufacturer:
- FTDI Chip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Maximum Data Rate | 3Mbps | |
| Product Type | Multiprotocol Transceiver | |
| Number of Transmitters | 1 | |
| Number of Receivers | 1 | |
| Number of Transceivers | 1 | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Minimum Supply Voltage | 3.3V | |
| Pin Count | 16 | |
| Transmitter Signal Type | Ttl | |
| Maximum Supply Voltage | 5.25V | |
| Receiver Signal Type | Ttl | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Interface Standards | RS232, RS422, TTL, USB 2.0, RS485 | |
| Power Supply Type | USB | |
| Series | FT230X | |
| Standards/Approvals | RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | |
| Automotive Standard | No | |
| Supply Current | 8mA | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Maximum Data Rate 3Mbps | ||
Product Type Multiprotocol Transceiver | ||
Number of Transmitters 1 | ||
Number of Receivers 1 | ||
Number of Transceivers 1 | ||
Mount Type Surface | ||
Package Type QFN | ||
Minimum Supply Voltage 3.3V | ||
Pin Count 16 | ||
Transmitter Signal Type Ttl | ||
Maximum Supply Voltage 5.25V | ||
Receiver Signal Type Ttl | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Interface Standards RS232, RS422, TTL, USB 2.0, RS485 | ||
Power Supply Type USB | ||
Series FT230X | ||
Standards/Approvals RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | ||
Automotive Standard No | ||
Supply Current 8mA | ||
The FTDI Chips FT230XQ series is full speed USB to basic serial UART interface device. It has a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count. It has 16 pin QFN package.
Asynchronous and synchronous bit bang modes
Operates between +3.3V and +5.25V
Configurable I/O pin output drive strength of 4mA (min) and 16mA (max)
Related links
- RS PRO 150 mm Stainless Steel Scissors
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long
- Arduino Uno Rev 3 SMD
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall
