onsemi NFAM5065L4B, AC Induction, DC Motor Intelligent Power Module, 650 V 100 A 39-Pin, DIP
- RS Stock No.:
- 195-8974
- Mfr. Part No.:
- NFAM5065L4B
- Manufacturer:
- onsemi
This image is representative of the product range
Stock information currently inaccessible
- RS Stock No.:
- 195-8974
- Mfr. Part No.:
- NFAM5065L4B
- Manufacturer:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Intelligent Power Module | |
| Motor Type | AC Induction, DC Motor | |
| Configuration | 3 Phase | |
| Maximum IGBT Collector Current | 100A | |
| Maximum Collector Emitter Voltage Vceo | 650V | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Pin Count | 39 | |
| Output Current | 50A | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 450V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 20kHz | |
| Maximum Operating Temperature | 150°C | |
| Height | 13.2mm | |
| Length | 54.4mm | |
| Series | NFAM5065L4B | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Supply Current | 6mA | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Intelligent Power Module | ||
Motor Type AC Induction, DC Motor | ||
Configuration 3 Phase | ||
Maximum IGBT Collector Current 100A | ||
Maximum Collector Emitter Voltage Vceo 650V | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Pin Count 39 | ||
Output Current 50A | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 450V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 20kHz | ||
Maximum Operating Temperature 150°C | ||
Height 13.2mm | ||
Length 54.4mm | ||
Series NFAM5065L4B | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Supply Current 6mA | ||
The On Semiconductor Intelligent 100A power module is a fully-integrated inverter power module has an independent High side gate driver, LVIC, six IGBT’s, suitable for driving permanent magnet synchronous motors, brushless DC (BLDC) motors and AC asynchronous motors. In this device IGBT’s are configured in a three-phase bridge with separate emitter connections for the lower legs for maximum flexibility in the choice of control algorithm.
Three-phase 650V, 50A IGBT module with independent drivers
Active logic interface
Built-in under voltage protection
Integrated bootstrap diodes and resistors separate low-side IGBT emitter connections for individual current sensing of each phase
Temperature Sensor (VTS)
Related links
- onsemi NFAM5065L4BT DC Motor Intelligent Power Module DIP
- onsemi DC Motor Intelligent Power Module DIP
- onsemi NFAM3065L4B DC Motor Intelligent Power Module DIP
- onsemi DC Motor Intelligent Power Module DIP
- onsemi FSB50550BS DC Motor Motor Driver IC SPM5Q
- onsemi DC Motor Motor Driver IC SPM5Q
- onsemi DC Motor Motor Driver IC SPMAA-J
- onsemi FND43060T2 DC Motor Motor Driver IC SPMAA-J