ROHM BD63717MUV-E2, Stepper Motor Motor Driver IC 24-Pin, VQFN24AV4040
- RS Stock No.:
- 646-614
- Mfr. Part No.:
- BD63717MUV-E2
- Manufacturer:
- ROHM
This image is representative of the product range
Bulk discount available
Subtotal (1 tape of 5 units)*
PHP1,016.94
(exc. VAT)
PHP1,138.975
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per Unit | Per Tape* |
|---|---|---|
| 5 - 20 | PHP203.388 | PHP1,016.94 |
| 25 + | PHP199.386 | PHP996.93 |
*price indicative
- RS Stock No.:
- 646-614
- Mfr. Part No.:
- BD63717MUV-E2
- Manufacturer:
- ROHM
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ROHM | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper Motor | |
| Package Type | VQFN24AV4040 | |
| Pin Count | 24 | |
| Output Current | 1.5A | |
| Maximum Supply Voltage | 26.4V | |
| Minimum Supply Voltage | 19V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Series | BD63717MUV | |
| Height | 1mm | |
| Width | 4 mm | |
| Standards/Approvals | No | |
| Length | 4mm | |
| Supply Current | 6.0mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand ROHM | ||
Product Type Motor Driver IC | ||
Motor Type Stepper Motor | ||
Package Type VQFN24AV4040 | ||
Pin Count 24 | ||
Output Current 1.5A | ||
Maximum Supply Voltage 26.4V | ||
Minimum Supply Voltage 19V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Series BD63717MUV | ||
Height 1mm | ||
Width 4 mm | ||
Standards/Approvals No | ||
Length 4mm | ||
Supply Current 6.0mA | ||
Automotive Standard No | ||
The ROHM Bipolar low consumption driver is driven by PWM current. Rated power supply voltage rating of 36 V, and rated output current is 1.5 A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode 2 types, HALF STEP mode 2 types, QUARTER STEP mode, 1/8 STEP mode and 1/16 STEP mode via a built-in DAC. Constant current control is possible without using an external sense resistor, and the board area can be reduced.
Free timing excitation mode switch
Current decay mode switch function
Power save function
Built-in logic input pull-down resistor
Power on reset function
Temperature shutdown circuit
Over current protection circuit
Under voltage lock out circuit