Schneider Electric Temperature Monitoring Relay, DPDT
- RS Stock No.:
- 609-8081
- Mfr. Part No.:
- LT3SM00MW
- Manufacturer:
- Schneider Electric
This image is representative of the product range
Stock information currently inaccessible
- RS Stock No.:
- 609-8081
- Mfr. Part No.:
- LT3SM00MW
- Manufacturer:
- Schneider Electric
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Schneider Electric | |
| Monitoring Application | Temperature | |
| Contact Configuration | DPDT | |
| Temperature Sensitivity | Overtemperature, Undertemperature | |
| Series | LT3SM | |
| Minimum Operating Temperature | -25°C | |
| Height | 100mm | |
| Dimensions | 100 x 22.5 x 100mm | |
| Maximum Operating Temperature | +60°C | |
| Length | 100mm | |
| Operating Temperature Range | +60°C | |
| Width | 22.5mm | |
| Select all | ||
|---|---|---|
Brand Schneider Electric | ||
Monitoring Application Temperature | ||
Contact Configuration DPDT | ||
Temperature Sensitivity Overtemperature, Undertemperature | ||
Series LT3SM | ||
Minimum Operating Temperature -25°C | ||
Height 100mm | ||
Dimensions 100 x 22.5 x 100mm | ||
Maximum Operating Temperature +60°C | ||
Length 100mm | ||
Operating Temperature Range +60°C | ||
Width 22.5mm | ||
- COO (Country of Origin):
- FR
Thermal protection relay for series LT3 S motors
Protection relay with probe, LT3 series, that permanently controls the temperature of machines that require protection (motors, alternators etc..). Operates via CTP thermistor probes.
Automatic or manual reset.
Faults displayed on the front panel of the device or remotely, except for version LT3 SE, which does not have this function.
Fault detection if the probe circuit is accidentally cut off
Three versions are available:
LT3 SE: Control devices with no fault memory.
LT3 SA: Automatic reset with thermistor short circuit detection device.
Warning light on front panel.
LT3 SM: Device with manual reset and thermistor short circuit detection.
On the front panel there is a fault warning light and voltage indicator, and a test and reset button.
Automatic or manual reset.
Faults displayed on the front panel of the device or remotely, except for version LT3 SE, which does not have this function.
Fault detection if the probe circuit is accidentally cut off
Three versions are available:
LT3 SE: Control devices with no fault memory.
LT3 SA: Automatic reset with thermistor short circuit detection device.
Warning light on front panel.
LT3 SM: Device with manual reset and thermistor short circuit detection.
On the front panel there is a fault warning light and voltage indicator, and a test and reset button.
Standards
IEC 60034-11, VDE 0660