Microchip, 8bit AVR, Microcontrollers Microcontroller, 20MHz, 8 kB Flash, 44-Pin TQFP

Bulk discount available

Subtotal 25 units (supplied in a tray)*

PHP3,238.65

(exc. VAT)

PHP3,627.30

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 465 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per Unit
25 - 95PHP129.546
100 +PHP126.956

*price indicative

Packaging Options:
RS Stock No.:
199-5367P
Mfr. Part No.:
ATMEGA324PB-AN
Manufacturer:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Family Name

Microcontrollers

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

44

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

8 kB

Maximum Frequency

20MHz

RAM Size

2 kB

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of I2C Channels

2

Number of CAN Channels

0

Number of USART Channels

3

Typical Operating Supply Voltage

1.8 → 5.5 V

Number of UART Channels

3

Dimensions

10.1 x 10.1 x 1.05mm

Program Memory Type

Flash

Maximum Operating Temperature

+85 °C

Maximum Number of Ethernet Channels

0

Pulse Width Modulation

1 (10 Channel)

ADCs

8 x 10 bit

Length

10.1mm

Number of Ethernet Channels

0

Number of ADC Units

1

Number of PCI Channels

0

Number of LIN Channels

0

Minimum Operating Temperature

-40 °C

Width

10.1mm

Height

1.05mm

Instruction Set Architecture

RISC

The Microchip ATmega324PB CMOS 8-bit microcontroller is based on the AVR enhanced RISC architecture. It operates on 1.8V to 5.5V voltage supply. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 32K bytes of In-System Programmable Flash with Read-While-Write capabilities, 1Kbytes EEPROM, 2Kbytes SRAM, 39 general purpose I/O lines, 32 general purpose working registers, five flexible Timer/Counters with compare modes, internal and external interrupts, three serial programmable USART, two byte-oriented 2-wire Serial Interface (I2C), two SPI serial port, a 8-channel 10-bit ADC with optional differential input stage with programmable gain, a programmable Watchdog Timer with internal Oscillator, IEEE std. 1149.1 compliant JTAG test interface, also used for accessing the On-chip debug system and programming, clock failure detection mechanism and six software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, USART, 2-wire Serial Interface, SPI port, and interrupt system to continue functioning. PTC with enabling up to 32 self-cap and 256 mutual-cap sensors. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 20 MIPS throughput at 20MHz

Programming lock for software security

Boundary-scan capabilities according to the JTAG Standard

Extensive on-chip debug support

Programming of flash, EEPROM, fuses, and lock bits through the JTAG Interface

Two 8-bit Timer/Counters with separate prescaler and compare mode

Real time counter with separate oscillator

Two Master/Slave SPI serial interfaces

Programmable watchdog timer with separate on-chip oscillator

Power-on Reset and Programmable Brown-out Detection

Internal 8 MHz Calibrated Oscillator

External and Internal Interrupt Sources

Clock Failure detection mechanism and switch to internal 8 MHz RC oscillator in case of Failure

Individual serial number to represent a unique ID