Microchip PIC32MX370F512L-I/PF, 32 bit PIC Microcontroller, 512kB FLASH, 100-Pin TQFP

This image is representative of the product range

View all Microcontrollers
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
Packaging Options:
RS Stock No.:
193-8408
Mfr. Part No.:
PIC32MX370F512L-I/PF
Manufacturer:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Product Type

Microcontroller

Package Type

TQFP

Mount Type

Surface Mount

Pin Count

100

Device Core

PIC

Data Bus Width

32bit

Program Memory Size

512kB

RAM Size

128kB

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

1.05mm

Width

12 mm

Length

12mm

Automotive Standard

AEC-Q100

Number of Timers

5

Program Memory Type

FLASH

ADCs

28 x 10 Bit

Instruction Set Architecture

RISC

120 MHz/150 DMIPS, MIPS32® M4K® core

Two I2S/SPI modules for Codec and serial communications

Peripheral Pin Select (PPS) functionality

Parallel Master Port (PMP) for graphics interfaces

Charge Time Measurement Unit (CTMU)

Temperature Range 40°C to 105°C

Microcontroller Features

Operating voltage range of 2.3V to 3.6V

512KB Flash memory (plus an additional 12 KB of Boot Flash)

128KB SRAM memory

MIPS16e® mode for up to 40% smaller code size

Pin-compatible with most Microchip 16-bit devices

Low-power management modes (Idle and Sleep)

Peripheral Features

Peripheral Pin Select (PPS) functionality

Up to 4 channels of hardware DMA with automatic data size detection

Five UARTs and two I2C™ modules

Hardware Real-Time Clock and Calendar (RTCC)

Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)

Five Capture inputs and Five Compare/PWM outputs

Audio/Graphics/Touch HMI Features

External graphics Interface with up to 34 PMP pins

Audio data communication: I2S, LJ, RJ, USB

Audio data control interface: SPI and I2C™

Audio data Master clock:

Generation of fractional clock frequencies

Can be synchronized with USB clock

Can be tuned in run-time

Charge Time Measurement Unit (CTMU):

Supports mTouch™ capacitive touch sensing

Provides high-resolution time measurement (1 ns)

On-chip temperature measurement capability

Advanced Analog Features

ADC Module:

10-bit 1Msps rate with one Sample and Hold (S&H)

Up to 28 analog inputs

Can operate during sleep mode

Comparators:

Two dual-input Comparator modules

Programmable references with 32 voltage points

Debugger Development Support

In-circuit and in-application programming

4-wire MIPS® Enhanced JTAG Interface

Unlimited program and six complex data breakpoints

IEEE 1149.2-compatible (JTAG) boundary scan

Related links