Honeywell GLD Series Roller Lever Limit Switch, SPDT, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 10A

This limit switch provides reliable position detection for industrial automation and control systems, using a roller lever actuator to convert mechanical movement into an electrical change. Designed for demanding environments, it offers a Compact switching solution suitable for assembly lines, conveyor systems and machinery where repeatable snap-action switching is required.

• SPDT contact configuration ensures single-pole changeover switching capability
• Snap-action contacts deliver Rapid make-and-break performance
• Rated switching current 10A supports substantial load handling
• Can switch AC voltages up to 240V for common control circuits
• Mechanical life of 10 million cycles reduces service interventions
• Operating range -40°C to 85°C permits use across varied temperatures

• Suitable for end-of-travel detection on conveyors and actuators
• Ideal for limit sensing in packaging and material handling equipment
• Used for position confirmation on industrial presses and lifts
• Can be used for safety interlocks on access panels and guards

It accepts PG13.5 conduit entry to accommodate standard industrial cable glands.

The enclosure meets IP66, preventing ingress of dust and powerful water jets.

The body is MADE from fibreglass-reinforced thermoplastic to improve toughness and durability.

It carries multiple approvals including UL, CE, CSA, CCC, EN and IEC as well as RoHS compliance.

UL/ UL listed for Canada

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.