Honeywell GLA Series Roller Lever Limit Switch, 1 NO/1 NC, IP67, Die Cast Zinc Housing, 600V ac

RS Stock No.:: 240-2515
Distrelec Article No.:: 303-01-502
Mfr. Part No.:: GLAC07A1B
Manufacturer:: Honeywell

Honeywell GLA Series Roller Lever Limit Switch, 1 NO/1 NC, IP67, Die Cast Zinc Housing, 600V ac

Bulk discount available

Subtotal (1 unit)*

PHP20,036.33

(exc. VAT)

PHP22,440.69

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per Unit
1 - 4	PHP20,036.33
5 +	PHP19,435.23

*price indicative

RS Stock No.:: 240-2515
Distrelec Article No.:: 303-01-502
Mfr. Part No.:: GLAC07A1B
Manufacturer:: Honeywell

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	M20
	Series	GLA
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Length	145.8mm
	Standards/Approvals	CCC, CE, CSA, UL
	Width	42mm
	Depth	42mm
	Hazardous Area Certification	NO
	Mechanical Life	15000000Cycles
	Conduit Entry	20 mm
	Operating Force	0.33Nm

	Select all
	Brand Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type M20
	Series GLA
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Length 145.8mm
	Standards/Approvals CCC, CE, CSA, UL
	Width 42mm
	Depth 42mm
	Hazardous Area Certification NO
	Mechanical Life 15000000Cycles
	Conduit Entry 20 mm
	Operating Force 0.33Nm

COO (Country of Origin):: GB

Honeywell GLA Series Limit Switch, 20mm Conduit Entry, Roller Lever Actuator Type - GLAC07A1B

This limit switch provides mechanical position detection for industrial control systems, using a roller lever actuator to register movement and trigger control circuits. It is designed for demanding environments where sealed enclosure protection and defined contact switching are required, supporting both alternating and direct current control tasks.

Features and Benefits:

• Roller lever actuator delivers reliable actuation with low torque
• Snap‑action contacts enable Rapid make/break switching at voltages specified
• IP67 sealed enclosure protects internals from dust and immersion
• Electrostatic epoxy‑coated zinc housing resists corrosion in harsh sites
• Terminal configured for M20 conduit ensures secure cable entry
• Rated for heavy‑duty life of 15,000,000 operations for long service

Applications

• Suitable for conveyor end‑of‑travel detection in factories
• Ideal for machine‑tool limit sensing in automated production
• Used for safety interlocks on industrial doors and guards
• Can be used for position feedback in material‑handling systems

What contact arrangements are available and how do they behave electrically?

It provides one normally open and one normally closed contact with snap‑action switching suitable for AC up to 600V and DC up to 250 V, enabling both make and break signalling in control circuits.

What environmental temperatures can it withstand during operation?

The unit is rated to operate from −25 °C up to 85 °C, allowing use in a wide range of indoor and sheltered outdoor industrial locations.

How is mechanical durability expressed for repetitive cycling applications?

Mechanical endurance is specified as 15,000,000 operations, making it appropriate for high‑cycle installations requiring extended service life.

What certifications cover its safety and regulatory acceptance?

It carries multiple standards approvals including CE, UL, CSA and CCC to meet regional conformity requirements.

What mounting and wiring considerations should be observed on site?

Use the provided M20 conduit entry for secure cable installation and select compatible glands to maintain the IP67 enclosure integrity.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.