Honeywell GLA Series Plunger Limit Switch, 2NO/2NC, IP67, DPDT, Die Cast Zinc Housing, 600V ac Max, 10A Max

Model GLAC20C is a double pole, double throw (DPDT) snap action limit switch. It features two normally open (NO) and two normally closed (NC) contacts.

This limit switch has a stainless steel 12 x 5 mm roller plunger at the top of the unit. You can use limit switches with a roller plunger in applications where some degree of side thrust comes into contact with the cam.

GLAC20C has a 20 mm conduit and operating torque of 16 Nm or 3.6 in-lb.

Fitted with silver contacts as standard, this model is perfect for your power switching applications.

• Snap-action contacts for rapid switching action
• Die-cast zinc housing material is shock, vibration and corrosion-resistant for use in heavy-duty applications
• Galvanically isolated contacts prevent interference between electrical currents
• Long lifespan of up to 15 million mechanical operations for long-lasting use

• Mobile cranes
• Automotive assembly lines
• Railroad signalling equipment
• Front loaders
• Aerial lifts

Yes, this limit switch's IP67 (ingress protection) rating means it's protected against dust and can withstand submersion in 1m of water for up to 30 minutes.

UL; CSA

UL/ UL listed for Canada