Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Relay Output, Cable, ATEX-Rated

RS Stock No.:: 768-2000
Mfr. Part No.:: WAVES61.EEJ2RA
Manufacturer:: Vega

Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Relay Output, Cable, ATEX-Rated

This image is representative of the product range

Subtotal (1 unit)*

PHP41,394.72

(exc. VAT)

PHP46,362.09

(inc. VAT)

FREE delivery for orders over ₱3,000.00

In Stock

11 unit(s) ready to ship from another location

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per Unit
1 +	PHP41,394.72

*price indicative

RS Stock No.:: 768-2000
Mfr. Part No.:: WAVES61.EEJ2RA
Manufacturer:: Vega

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Vega
	Device Type	Vibrating Level Switch
	Mounting Type	Cable
	Switch Output	Relay
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	+150°C
	Maximum Current	1 A dc, 3 A ac
	Maximum Pressure	1.1bar
	Hazardous Area Certification	ATEX
	Series	VEGAWAVE 61

	Select all
	Brand Vega
	Device Type Vibrating Level Switch
	Mounting Type Cable
	Switch Output Relay
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature +150°C
	Maximum Current 1 A dc, 3 A ac
	Maximum Pressure 1.1bar
	Hazardous Area Certification ATEX
	Series VEGAWAVE 61

RoHS Status: Not Applicable

COO (Country of Origin):: DE

Vega Vibrating Level Switch

The Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings.

All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits

The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC

Process fitting material is thread G1½ PN25, DIN3852-A

Easy setup without adjustment

Product-independent switching point

Rugged sensor construction

Insensitive to build-up and statically charged products

Solid densities from 8g/l reliably detected

maintenance-free and does not wear out easily

External LED switch

Housing material PBT (plastic)

Density is greater than 100g/l

Breaking capacity maximum 750VA, 54W

Applications

Typical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Almost all the bulk solids applications

Certifications

IP66 rated

IP67 rated

ATEX II 1/3 D IP6X T