RS PRO 3P Pole DIN Rail Isolator Switch - 80A Maximum Current, 30kW Power Rating, IP65

A high quality, durable back of panel mount isolator complete with handle and shaft. The switch is back of panel mount, either 35mm din rail or two screw fixing. The handle is interlocked ensuring removal only in the off position, and is padlockable in the off position. The shaft is hexagonal for rigidity, 8mm across the flats and is supplied at 282mm length. Maximum panel thickness is 3mm.

DIN rail mount
Metal shaft 282mm (3 pole) and 94mm (6 pole) in length
All switch ratings at AC22
2 rear hole mounting or 35mm DIN rail mount
Maximum panel thickness 3mm
Depth behind panel 355mm
Padlockable

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

CB, CE, SEMKO, UL508
Rubber Gasket 773-7995