Hammond 1599 Series Black Flame Retardant ABS Enclosure, IP54, Black Lid, 220 x 140 x 40mm

Moulded in either flame retardant ABS or general purpose ABS plastic.
2-piece lap joint construction
Designed to meet IP54
Extra deep top and shallow base sections
Recessed area on top of case for keypads/displays, etc.
Lid is secured with either Philips machine screws, threaded into tapped integral brass bushings (flame retardant version or self tapping screws (general purpose version)
Base with moulded knockouts for wall mounting
Top and base have 6 bosses for PCB mounting
Tops have vertical card guides

Flame retardant version carries a UL flammability rating of 94V-0.

This stud-type cam follower from SKF is the ideal choice for when you need to convert rotary motion to linear motion. A thick-walled outer ring enables it to withstand high radial loads, while the crowned raceways ensure a long service life. There's a hexagonal recess at the end of the stud, so it can be mounted easily using a hex key. The internal flange ring accommodates axial loads caused by skews to prevent damage from skidding. Lubrication is simple thanks to the supplied grease nipples.

• For concentric ring slide and track system bearings
• Operating temperature range of -30°C to +100°C
• Bore size of 10 mm
• Roller diameter of 22 mm
• Roller length of 12 mm
• Static load rating of 6700 N
• Dynamic load rating of 5500 N

• Cam mechanisms
• Guideways
• Conveying and linear guidance systems
• Industrial equipment

This cam follower uses polyamide 66 caging, which produces little friction and permits high speeds. In low lubrication conditions, the caging can reduce the risk of seizure and damage to other components in the system.

Material Flamability Rating: UL94-V0