Spelsberg TK PC Series Grey Polycarbonate Enclosure, IP66, Grey Lid, 94 x 94 x 57mm

The TK-PC series from Spelsberg is an empty enclosure with pre-pressed metric knockouts designed to house a wide range of electrical, electronic and pneumatic equipment. The enclosure base is made from grey polycarbonate and there is a choice of either a transparent or grey polycarbonate lid. The TK-PC has a IP66 rating and is resistant to most acids and alkalis.

IP66 ingress protection acc. EN 60529 / DIN VDE 0470-1
IK07 impact resistant acc. DIN EN 5012 / VDE 0470 Part 100
Flammability rating: VDE 0471, UL94, 960 °C / V2
Operating temperature range -35 to +80 °C
With pre-pressed metric knockouts (see datasheets for details)
Wall mounting using through holes below lid fixing screws
Surface mounting using knockouts in bottom of base (sealing plugs provided)
Integrated polyurethane cover gasket
Halogen Free

Grey (RAL 7035) glass-fibre reinforced polycarbonate base and cover with knockouts. The Polycarbonate box enclosure also includes polyurethane sealing, and polyamide 6 fibre glass reinforced cover screws.

45 mm

Rated insulation voltage 1000 V DC

Yes, enclosure is best suitable for indoor and outdoor use.

There are cable entries with this model.

This article is completely silicone free.

Both are plastic and resistant to rust and corrosion and will not dent – unlike metal. Both at halogen free which is important to consider for applications where the possibility of fire can lead to exposure to harmful fumes.

An enclosure box with knockouts is a hole that is built into the enclosure that has covering of plastic material covering the area of the required hole. You simply break the plastic material and you have a ready-made hole for mounting.