Eaton 25A 6.3 x 32 mm, Bolt Mount Bolt Down Fuse Block, 300V ac/dc
- RS Stock No.:
- 852-7219
- Mfr. Part No.:
- S-8002-1-R
- Manufacturer:
- Eaton
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 852-7219
- Mfr. Part No.:
- S-8002-1-R
- Manufacturer:
- Eaton
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Eaton | |
| Fuse Type | Bolt Down | |
| Product Type | Fuse Block | |
| Fuse Size | 6.3 x 32 mm | |
| Number of Fuses | 1 | |
| Current Rating | 25A | |
| Voltage | 300V ac/dc | |
| Mount Type | Bolt Mount | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 60°C | |
| Body Material | Thermoplastic | |
| Standards/Approvals | RoHS. UL E14853, CSA 47235 | |
| Holder Terminal Type | Solder | |
| Clip Material | Spring Bronze | |
| For Use With | 6.3 x 32 mm Fuse | |
| Series | S-8000 | |
| Dielectric Strength | 600V | |
| Select all | ||
|---|---|---|
Brand Eaton | ||
Fuse Type Bolt Down | ||
Product Type Fuse Block | ||
Fuse Size 6.3 x 32 mm | ||
Number of Fuses 1 | ||
Current Rating 25A | ||
Voltage 300V ac/dc | ||
Mount Type Bolt Mount | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 60°C | ||
Body Material Thermoplastic | ||
Standards/Approvals RoHS. UL E14853, CSA 47235 | ||
Holder Terminal Type Solder | ||
Clip Material Spring Bronze | ||
For Use With 6.3 x 32 mm Fuse | ||
Series S-8000 | ||
Dielectric Strength 600V | ||
- COO (Country of Origin):
- US
Cooper Bussmann Fuse Block - S-8000 Series
The S-8000 Series from Cooper Bussmann offers a professional range of Fuse Blocks from single pole to 12 pole units.
Tight cluster mounting
Single pole to 12 pole units
300 Volt Rating
Choice of solder, quick connect (QC) or screw terminals
UL Recognised
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Note
Eaton formerly known as Bussmann