Microchip LAN9252/PT, Ethernet Controller, 3.3 V 100 Mbps SPI, 64-Pin 3.3 V
- RS Stock No.:
- 235-4641
- Mfr. Part No.:
- LAN9252/PT
- Manufacturer:
- Microchip
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 235-4641
- Mfr. Part No.:
- LAN9252/PT
- Manufacturer:
- Microchip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Communication Mode | Full Duplex/Half Duplex | |
| Number of Transceivers | 2 | |
| Loopback Mode | Internal | |
| Interface Type | SPI | |
| Standard Supported | IEEE 802.3u | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 64 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Width | 10 mm | |
| Minimum Supply Voltage | 3.3V | |
| Height | 1.2mm | |
| Length | 10mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Communication Mode Full Duplex/Half Duplex | ||
Number of Transceivers 2 | ||
Loopback Mode Internal | ||
Interface Type SPI | ||
Standard Supported IEEE 802.3u | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 64 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
Width 10 mm | ||
Minimum Supply Voltage 3.3V | ||
Height 1.2mm | ||
Length 10mm | ||
Automotive Standard No | ||
The Microchip LAN9252 series is a 2/3-port EtherCAT device controller with dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX transceiver and support 100Mbps operation. The LAN9252 supports HP Auto-MDIX, allowing the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external Fibre transceiver. This device provides system developers a cost-effective solution for realizing EtherCAT device solutions.
Dual Integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100 Base FX support via external transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V core regulator for single 3.3V operation
Low pin count, high integration and small body size package
Related links
- Microchip LAN9252/PT 3.3 V 100 Mbps SPI, 64-Pin 3.3 V
- Microchip LAN9252I/PT 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V TQFP
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V TQFP
- WIZnet Inc W5100 3.3 V 100 Mbps SPI, 80-Pin 3.3 V LQFP
- WIZnet Inc 3.3 V 100 Mbps SPI, 80-Pin 3.3 V LQFP
- Microchip 3.3 V 100 Mbps USB 2.0 64-Pin 3.3 V QFN
- Microchip LAN9252I/ML 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN