Amphenol Industrial 130055 Series Female RJ45 Connector, Panel Mount, Cat5e Straight 1 Port 8 -Way

View all Ethernet Connectors
Stock information currently inaccessible
RS Stock No.:
385-1362
Mfr. Part No.:
1300550001
Manufacturer:
Amphenol Industrial
Find similar products by selecting one or more attributes.
Select all

Brand

Amphenol Industrial

Gender

Female

Ethernet Connector Type

RJ45 Connector

LAN Category

Cat5e

Number of Ports

1

Mounting Type

Panel Mount

Number of Ways

8

Connector Type

RJ45

Shield Type

Shielded

Orientation

Straight

IP Rating

IP67

Length

49.53mm

Width

49.8mm

Depth

38.1mm

Series

130055

Series Number

130055

Panel Sockets


Sealed panel mounting shielded RJ45 sockets meet IP67 rating when mated with RJLnxx plugs and patch leads. All models are highly reliable and excellent quality.

Features & Benefits


The PCB version has solder pads for wire connection to the socket. Pads are clearly numbered against socket contacts

The through socket version has a fully shielded socket on the rear PCB. This allows immediate connection through an RJ45 plug. Ideal for greater serviceability and easy maintenance. Wired to 568B

The IDC version has colour coded terminal blocks allowing IDC terminations in seconds. Typical 110 punchdown hand tool stock no. 472-6740.

Direct PCB mount version, with front lock nut design is ideal for OEM applications where the receptacle is terminated directly onto a PCB. Which is then mounted into the device housing (overall depth 20.3 mm)

A fifth version has a 300 mm shielded cable and terminated RJ45 plug wired (568B) to the rear PCB. Facilitates rapid connection to internal sockets

A dust cap for unused sockets stock no 385-4197 is available separately. This gives an IP67 rating when fitted


Need a protection cap?
Check out: 385-4197

Other variants:
385-1356 & 446-3354 – RJ45, Direct PCB mount.
385-1362 – RJ45, With PCB and RJ45 port from the back.
385-1384 – RJ45 with mounted male RJ45 termination.
446-3360 – RJ45 with punch down receptacles (Punch down tool – 472-6740)

Brad from Molex Female Connector, Cat5e, RJ45 - RJ-Lnxx Series - ENSP1F5


This Brad from Molex panel socket is an extension component that provides an Ethernet port on your printed circuit board (PCB). It's commonly used to integrate an RJ45 (Registered Jack) connector into a circuit design for transmission control protocol (TCP) or internet protocol (IP) communication applications. Thanks to ingress protection rating of IP67, you can be sure this device is dustproof and resistant to water. It also comes with a protective cap, making it a good choice for use in harsh industrial conditions. The connector is made of a robust ABS (acrylonitrile butadiene styrene) material for resistance to impact and corrosion, so it's a long-lasting choice.

• Compact dimensions of 49.53 (length) x 38.1mm (depth) for use in tight spaces
• Shielded port for advanced protection from electromagnetic interference
• Wide operating temperature range of -20°C to +80°C for use in a demanding environments

Applications


• Data communication
• Industrial equipment
• Electrical panel design

How do I install this connector?


This connector is a through-panel receptacle, meaning you can install it directly to a device using a standard male patch cord or jumper.


BRAD Range


Fully sealed (rated IP67) RJ45 connectors for use in environmentally demanding applications
Overmoulded and bonded envelopes protect data transmission in harsh applications against water, oil and dust ingress both for internal and external use
Connectors perform to category 5e standards and are available in shielded versions particularly suitable in electrically noisy environments

Related links