Recom RS DC-DC Converter, ±5V dc/ ±200mA Output, 9 → 18 V dc Input, 2W, Through Hole, +85°C Max Temp -40°C Min

High power-density, an industrial temperature range of -40° to +85°C.
Additional features such as Remote-On-Off control make these converters ideal for highly sophisticated industrial designs.

2:1 wide input range
Regulated outputs
1kVdc isolation
Continuous short circuit protection
Low noise
UL94V-0 package material
83% efficiency
SIP 8 package

Operating temperature is without derating.

EN60950-1

Is your power supply too much for your hardware to handle? Get this DC-DC converter from RECOM on the case. It steps input voltages between 9 and 18V DC down to an output voltage of +5V DC, giving you just the right amount of juice for your low-power equipment. A dual-output design means the product connects to two components at once for enhanced versatility. Thanks to its continuous short-circuit protection, it stops electrical damage in its tracks.

• Low ripple and noise of 50mVp-p to ensure reliable signal transmission
• Through-hole mounting for simple and secure installation on a PCB
• Safe for use in harsh environments, thanks to a wide operating temperature range between -40°C and +85°C
• Burning stops in 10 seconds or less for safety in the event of a fire

• Industrial sensors
• Power supplies
• Renewable energy industry

This component has an efficiency between 73 and 75%. This means that minimal energy is lost as heat, so it doesn't get hot under the collar in heavy-duty applications.