TRACOPOWER TEL 3 DC-DC Converter, ±12V dc/ ±125mA Output, 36 → 75 V dc Input, 3W, Through Hole, +85°C Max Temp

The Traco Power TEL-3 series is a range of isolated, 3 Watt, DC-DC converters in a DIP-24 package. With their high efficiency these regulated converters allows operation temperature up to 71°C at full load and low output noise. The TEL-3 series feature wide input range and tightly regulated output voltage, which qualifies these DC-DC converters for many cost critical applications in industrial and consumer electronics.

Wide 2:1 and 3:1 input range
High efficiency up to 81%
DIL-24 plastic package
Indefinite short-circuit protection
I/O isolation 1500 VDC
Available with industry standard pinout (NP)
Operating temperature range –40°C to +85°C

UL 60950-1, IEC/EN 60950-1

UL, cUL, EN, IEC, CSA File No. 226037

On the hunt for a PSU to tackle a broad range of input voltages? Try this DC-DC converter from Traco Power. It takes a voltage anywhere between 36 and 75V DC and steps it down to a stable supply of ±12V DC that's ideal for powering battery-run appliances. Thanks to a tight voltage set accuracy of ±1% and comprehensive line and load regulation of 0.5%, you get control of input and outputs. An efficiency rating of 81% means the unit produces little waste energy in the form of heat. This helps it to run smoothly in settings where operating temperatures reach extremes down to -40°C and up to +85°C.

• Low ripple and noise of less than 60 mVpk-pk means you get minimal disruption from EMI
• Mean time between failures of 1 million hours means you can expect this converter to last
• Flame-retardant casing won't contribute to the spread of flames in a fire

• Home appliances
• Smart lighting
• Photovoltaics

This converter comes with continuous short-circuit protection and is isolated to 1.5kV DC. This means you can trust it to keep you and your equipment safe from common current faults, as well as voltage surges or spikes.

UL Recognised; EN60950; UL1950