TRACOPOWER TBA 2 DC-DC Converter, 5V dc/ 400mA Output, 10.8 → 13.2 V dc Input, 2W, Through Hole, +85°C Max Temp

Ensure your electric circuit gets the stable supply it needs with this DC-DC converter from Traco Power. Accepting an input voltage range between 10.8 and 13.2V DC, it steps it down to a safe output of 5V DC. The device also puts up a 1500V DC isolation shield between the input and output sides to prevent electrical hazards from sparking up. A 79% efficiency rating indicates minimal energy is wasted during conversion, saving you the hassle of adding a heatsink to your board.

• Integrated automatic short-circuit recovery helps prevent damage from fault currents
• Typical output ripple and noise of 120mVp-p for reduced signal interference
• Mean time between failures of 2 million hours at +25°C for durable performance
• Robust plastic casing insulates against electric shocks
• Tinned copper pins are highly conductive to support reliable flow

• Robotics systems
• Consumer electronics
• Aerospace engineering

This converter has a maximum start-up time of 10ms, so you get quick power conversions.

A maximum voltage set accuracy of ±3% at 60% load means you can be sure of a steady supply.