Recom RSO DC-DC Converter, ±12V dc/ ±42mA Output, 9 → 36 V dc Input, 1W, Through Hole, +85°C Max Temp -40°C Min

RSO series 1W single/dual output regulated DC to DC converters with 4:1 input and high power density. These 1W single/dual output regulated DC to DC converters have On-Off control and 3kVDC isolated versions are ,medically approved.

Ultra-wide 4:1 input voltage range
Regulated outputs
Low noise
No external capacitor needed
Remote On/Off Control
Continuous short circuit protection
UL94V-0 package material
SIP-8 package

Part numbers suffixed with 'H3' have 3kVDC isolation and are medically approved
Power derates above 75°C operating temperature
MTBF to MIL-HDBK-217F (25°C).

EN-60950-1
EN-60601-1 (medically approved, part numbers suffixed with 'H3' only

Ensure a stable voltage for your electrical appliances using this DC-DC converter from RECOM. It provides a steady output voltage of +12V DC for use in low-voltage applications. Continuous short-circuit protection helps to minimise the risk of damage caused by electrical faults. As the converter has compact dimensions of 21.8 (L) x 9.2 (W) x 11.1mm (H), it's ideal for installation in setups where space is limited. A mean time between failures of 1,685,000 hours at +25°C means it's a long-lasting and reliable choice.

• Isolation voltage of 1kV DC for protection against surges
• Wide operating temperature range between -40°C and +85°C for use in harsh settings
• Two outputs to handle two devices at the same time, cutting out the need for a second converter

• Industrial computer control systems
• Manufacturing industry
• Medical applications
• Testing circuits

This unit is designed for through-hole mounting, which gives you a secure connection to your PCB.

Yes, this is a regulated DC-DC converter, so it offers close control over output voltages regardless of varying operating conditions. This means you can rely on it for a consistent voltage supply.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.