Recom RD DC-DC Converter, ±12V dc/ ±84mA Output, 21.6 → 26.4 V dc Input, 2W, Through Hole, +85°C Max Temp -40°C

Unregulated outputs
1kVdc isolation
Power sharing on outputs
Short circuit protected
Efficiency up to 86%
UL94V-0 package material
Industry standard SIP7 package

MTBF to MIL-HDBK 217F.
Operating temperature is without derating.

EN-60950-1

Create dual power rails from a single supply with this DC-DC converter from RECOM. It's an efficient choice that converts input voltages between 21.6 and 26.4V DC to ±12V DC outputs with ±5% accuracy. Its non-conductive silicone rubber casing prevents electrical leaks from damaging nearby components. The device stops your system from overloading by isolating power surges up to 1kV DC power for one second or 500V AC for one minute. Thanks to the through-hole mounting style, you can easily install it directly onto circuit boards.

• Dimensions of 19.65 (L) x 7.05 (W) x 10.2mm (H) to fit small and medium-sized circuit systems
• Wide operating temperature range between -40°C and +85°C for use in demanding setups

• Industrial machinery
• Telecommunications industry
• Consumer electronics

You can easily install this converter by inserting the pins in the through-holes on a printed circuit board. Once in place, solder the pins to the pads on the reverse side to connect the unit to your circuit.

You'd use a dual-output converter to power two systems via a circuit board. For example, you can use it to power attached components while charging an internal battery.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.