Recom RP20-AW DC-DC Converter, 12V dc/ 1.67A Output, 9 → 36 V dc Input, 20W, Through Hole, +90°C Max Temp -55°C

The Recom RP20-SAW series is an ultra miniature DC/DC converter, with wide input range power. These DC/DC converters have a case which is half the size of conventional industry standard 20W converters.
Even with their small size the RP20-SAW are fully specified devices, with output current up to 4.5A, up to 90% efficiency, no minimum load, 1600 V dc isolation, a built-in Class A EMC filter and low ripple/noise figures. These DC/DC converters are short circuit, over current and over voltage protected. The RP20-SAW has a very low no load input current of 4mA/6mA. Ideal for application with reduced board space and in battery powered systems where standby current is important.

Ultra miniature Package
20 W Output Power
Single or Dual Outputs
Wide 4:1 Input Voltage Range
1.6kV dc Isolation
Fixed Operating Frequency
Built-in Class A EMC Filter
Six-Sided Continuous Shield
Industry Standard Pinout
Remote On/Off and Trim pins
Efficiency to 90%

UL-60950-1

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.