ROHM BM2PDB1Y-Z, 5-Channel DC/DC Converter 7-Pin, DIP-7K
- RS Stock No.:
- 255-7708
- Mfr. Part No.:
- BM2PDB1Y-Z
- Manufacturer:
- ROHM
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 255-7708
- Mfr. Part No.:
- BM2PDB1Y-Z
- Manufacturer:
- ROHM
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ROHM | |
| Product Type | DC/DC Converter | |
| Minimum Input Voltage | 11.1V | |
| Maximum Input Voltage | 26V | |
| Number of Outputs | 5 | |
| Mount Type | Through Hole | |
| Package Type | DIP-7K | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 7 | |
| Maximum Operating Temperature | 105°C | |
| Height | 8.63mm | |
| Standards/Approvals | RoHS | |
| Width | 6.35mm | |
| Length | 9.27mm | |
| Series | BM2PDB1 | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand ROHM | ||
Product Type DC/DC Converter | ||
Minimum Input Voltage 11.1V | ||
Maximum Input Voltage 26V | ||
Number of Outputs 5 | ||
Mount Type Through Hole | ||
Package Type DIP-7K | ||
Minimum Operating Temperature -40°C | ||
Pin Count 7 | ||
Maximum Operating Temperature 105°C | ||
Height 8.63mm | ||
Standards/Approvals RoHS | ||
Width 6.35mm | ||
Length 9.27mm | ||
Series BM2PDB1 | ||
Automotive Standard No | ||
The ROHM Non-isolated type PWM DC/DC converter IC built-in switching MOSFET provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolation. By a built-in startup circuit that tolerates 650 V, this IC contributes to low power consumption. A current detection resistor as internal device realizes the small power supply designs. Since a current mode control is utilized, the current can be restricted in each cycle and an excellent performance is demonstrated in the bandwidth and transient response. The switching frequency is fixed to 25 kHz / 65 kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET with 650 V withstand voltage makes the design easy.
PWM current mode method
Frequency hopping function
Burst operation at light load
Built-in 650 V startup circuit
Built-in 650 V super junction MOSFET
VCC UVLO (under voltage lockout)
VCC OVP (over voltage protection)
Over current detection function per cyc