Weidmuller PZ Hand Ratcheting Crimp Tool for Wire Ferrules

A cord end ferrule ratchet tool to suit ferrules 0.5 through to 6 mm. This ferrule crimp tool crimps ferrules with and without insulating plastic collars. Ferrule insertion is from the side. Pull-off figures are as follows: 0.25 mm² = 15 N, 0.5 mm² = 30 N, 0.75 mm² = 30 N, 1.0 mm² = 30 N, 1.5 mm² = 40 N, 2.5 mm² = 50 N, 4.0 mm² = 50 N, 6.0 mm² = 60 N

Long-handled variant - may reduce the risk of Repetitive Strain Injury

Quickly add a connection to your electrical cabling with the help of this crimping tool from Weidmuller. It's designed for handheld operation, so it's easy to carry for use on different job sites. For versatility, you can use the unit to crimp both insulated and uninsulated bootlace wire-end ferrules. An integrated ratchet mechanism helps you to achieve precise joins, while a release option lets you conveniently free the wire in case of incorrect operation. This tool is ergonomically designed to fit comfortably into your hand, reducing fatigue when used for long periods of time.

• Ferrule insertion from the side of the unit for ease of use
• Light weight of 380g makes it easy to handle
• Achieves an airtight crimp to minimise the risk of wire corrosion
• Ensures quick conductor connections as there's no need for soldering

• Electrical installations
• Cable assemblies
• Maintenance

To ensure optimal performance, it's recommended that you lubricate this unit approximately every 10,000 cycles or after it's been exposed to contaminants.

General Support Tooling