Lapp ÖLFLEX CLASSIC 100 SY Control Cable, 5 Cores, 2.5 mm², SY, Screened, 50m, Grey PVC Sheath, 14 AWG

From Lapp, the Olflex Classic 110 series is a PVC control cable ideal for a variety of applications. Protected by braided steel wire, the cable has a high degree of mechanical resistance. Coupled with its resistance to chemicals and oils, Olflex Classic 110 cables are fit for use in the roughest of operating conditions.

The flexible multi-core cable is comprised of fine-wire copper strands twisted in layers, covered in PVC insulation. Then cable then has an oxidated protective steel wire braiding, and a transparent flame retardant out sheath. The transparent sheath is useful to inspect the cable for wear and tear, such as corrosion and deterioration.

Features and Benefits

• Fine copper wire strands in accordance to VDE 0295 class 5 / IEC class 5
• Flame retardant to IEC 60332-1-2
• High resistance against acids, alkaline and oils
• Good Chemical Resistance
• Excellent mechanical protection
• Compliant with directive 73//23 (Low Voltage Directive)
• Operating temperature range for fixed installations -40°C to +80°C
• Operating temperature range for occasional flexing -5°C to +70°C

Applications

Lapp Olflex Classic 110 SY cable is very durable, and so can be used for a wide range of applications in areas where high mechanical stress is likely. It is often used in;

• HVAC Systems
• Industrial Machinery
• Machine Tooling
• Plant Engineering

Accessories

Lapp cables should be used with accessories that match their capabilities, and as such Lapp provides a range of durable and easy-to-install cable glands.

• 433-0945 is an M16 IP68 Skintop Cable Gland
• 433-0951 is an M20 IP68 Skintop Cable Gland
• 433-0967 is an M25 IP68 Skintop Cable Gland
• 433-0973 is an M32 IP68 Skintop Cable Gland
• 433-0989 is an M40 IP68 Skintop Cable Gland

Connection and control cable with coloured cores and steel wire braid for control devices, machine tools, conveyor belts and production lines in dry, damp and wet interiors
Fine wire strands of copper
Twisted cores in layers, colour coded in accordance with VDE 0293
Inner sheathing made from special PVC compound, grey
Braid made from oxidation-protected steel wire braid
Transparent outer sheathing made from special PVC-based mixture, flame-retardant to IEC 332.1
Compliant with Directive 73/23/EWG (Low Voltage Directive)

This cable confirms to ECD 73/23/EEC (low voltage directive).

Deliver operating signals to the circuits of your equipment with this 5-core control cable from LAPP. Its bare copper conductors with a 2.5mm² cross-sectional area go with the flow and give reliable power and signal transmissions. As it has a 26A current rating, this lead can handle the demands of high-current electrical systems. The durable PVC jacket has self-extinguishing properties for safe use in places at risk of fire. This cable stands up to acids, oils and chemicals for durability in challenging operations.

• Reel length of 50m offers sufficient stock for multiple applications
• Galvanised steel braid screen shields signals from EMI
• Integrated earth cable to discharge fault currents

• Oil and gas rigs
• Construction sites
• Electrical engineering

This cable has a minimum bend radius that's six times its 15.2mm diameter in fixed applications and 20 times its diameter in occasional flexing installations.

VDE 0295, Part 5