Schneider Electric TeSys K LP5K Reversing Contactor, 24 V dc Coil, 3-Pole, 6 A, 1.5 kW, 3NO, 690 V ac

Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50/60Hz rated) of 4.5VA (Hold in) and 30VA (inrush).

6 Amps and 9 Amps switching current
3 poles + 1 auxiliary contact
35mm DIN Rail/ Screw mounting
Screw clamp termination
LED indication in front fascia
Compatible with PLC outputs
609-7971contact configuration 1N/C
609-7965 and 609-7987 contact configuration 1N/O
609-7959 contact configuration 1N/O-1N/C

4 pole relays with 10A thermally rated contacts suitable for AC or DC control voltages. Low consumption coil versions with built in suppression and suitable to be used with programmable controllers are also available.

• Contacts with 10A thermal rating, suitable for use down to 17V 5mA


• Four-pole for operation with AC or DC control circuits


• Variety of auxiliary contacts, and timer modules


• Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

UL, CSA.

BS 5424, IEC 60947, NF C 63-110, VDE 0660.