ABB GA75 Contactor, 220V, 230 V Coil, 3-Pole, 100 A 220V, 230 V, 3 NO, 1kV

RS Stock No.:: 253-2035
Mfr. Part No.:: 1SBL411025R8000
Manufacturer:: ABB

ABB GA75 Contactor, 220V, 230 V Coil, 3-Pole, 100 A 220V, 230 V, 3 NO, 1kV

View all Contactors

Subtotal (1 unit)*

PHP44,394.77

(exc. VAT)

PHP49,722.14

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per Unit
1 +	PHP44,394.77

*price indicative

RS Stock No.:: 253-2035
Mfr. Part No.:: 1SBL411025R8000
Manufacturer:: ABB

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	ABB
	Product Type	Contactor
	Coil Voltage	220, 230V
	Number of Poles	3
	Contact Voltage	1kV
	Contact Current	100A
	Series	GA75
	Function	DC Switching
	Normal State Configuration	3 NO
	Number of Auxiliary Contacts	0
	Terminal Type	Screw
	Control Circuit Voltage Uc	220, 230V
	Minimum Operating Temperature	-40°C
	Operational Current Ie	120A
	Contactor Application	Control Unit
	Maximum Operating Temperature	70°C
	Standards/Approvals	EU Directive 2011/65/EU RoHS Status
	Depth	132mm
	Length	108mm
	Width	70mm
	Pole and Throw Configuration	1P

	Select all
	Brand ABB
	Product Type Contactor
	Coil Voltage 220, 230V
	Number of Poles 3
	Contact Voltage 1kV
	Contact Current 100A
	Series GA75
	Function DC Switching
	Normal State Configuration 3 NO
	Number of Auxiliary Contacts 0
	Terminal Type Screw
	Control Circuit Voltage Uc 220, 230V
	Minimum Operating Temperature -40°C
	Operational Current Ie 120A
	Contactor Application Control Unit
	Maximum Operating Temperature 70°C
	Standards/Approvals EU Directive 2011/65/EU RoHS Status
	Depth 132mm
	Length 108mm
	Width 70mm
	Pole and Throw Configuration 1P

COO (Country of Origin):: BG

ABB GA75 Series Contactor, 125A Contact Current, 220 to 230V Control Circuit Voltage - 1SBL411025R8000

This contactor is a DC switching device designed for industrial control applications where reliable opening and closing of DC circuits is required. It operates with an AC control Coil and is configured as a three-pole, single-pole connection device with three normally open contacts. The unit is intended for integration into power control assemblies and offers robust electrical switching capability for medium to high DC voltages up to 1000 V.

Features & Benefits

• Rated for continuous DC switching at 125A providing high-current handling
• AC Coil rated 220 to 230V enabling standard mains control
• Screw terminals support heavy conductors for secure connections
• Arc chutes with permanent magnets reduce DC breaking stress
• Mechanical endurance of 10 million cycles for long service life

Applications

• Suitable for DC power distribution switching in industrial plants
• Ideal for traction or battery system switching solutions
• Used for control of DC motors and large resistive loads
• Can be used in renewable energy storage and inverter protection

What Terminal types are provided for main connections?

Main poles use screw terminals with M6 screws and a 13x10mm connector option for reliable conductor clamping and high-current capacity.

How does Coil consumption affect control panel design?

Pull-in and holding values vary by frequency

pull-in around 180 to 190 V·A and holding approximately 18 to 21 V·A, which informs relay or driver sising and thermal loading in the control supply.

What environmental limits should be observed during installation?

Operate between −40 °C and +70 °C at nominal control voltage, with storage down to −60 °C and permitted altitude up to 3000 m

these conditions influence placement and enclosure selection.

How quickly does it switch under normal conditions?

Typical operate times are 8 to 27 MS to close and 4 to 11 MS to open, which assists coordination with protection devices and timing-sensitive control schemes.