Schneider Electric LC1D Contactor, 110 V ac Coil, 3-Pole, 125 A, 45 kW 110 V ac, 3 NO, 300 V dc, 1000V ac

TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 95A/1000V AC-3/AC-3e (45kW@400V). They can be used to create motor starters for almost any type of application. It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts, power connections by screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh). Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

• Compact 3-pole design simplifies installation in tight spaces

• Used in motor control circuits for seamless operation

It can manage both resistive and inductive loads, providing versatility in applications.

Yes, the DIN rail mounting system allows for straightforward installation and maintenance.

It operates effectively within a temperature range of -40 to 70°C.

It is advised for indoor use unless properly protected from adverse weather conditions.

Auxiliary contacts should be wired according to the provided connection diagrams to ensure compatibility with your application.