Microchip Breakout Module for MCP2210 Motherboard ADM00419

The MCP2210 Breakout Module can be used with either the MCP2210 Motherboard or as a standalone USB to SPI (Master) bridge module. The breakout board provides all the needed signals in order to assist the user in building their own boards using the MCP2210. The MCP2210 Utility software allows custom device configuration. In addition, a DLL package is also available in order to allow development of custom software utilizing the MCP2210.

Small plug-in board with DIP form factor (2, 10-pin headers spaced at 0.6 inches)
Mini-USB connector
Access to the SPI bus signals (MOSI, MISO, SCK)
9 x GP lines, configurable for GPIO, Chip Select or dedicated function operation
PICkit Serial Analyzer compatible header
+3.3 or +5V jumper selectable V_DD
Able to supply up to 500mA to the rest of the system

Microchip provides you a free Windows based software for you to use with the ADM00419. This software will allow you to control I/O and setup custom device configurations. Below you can find the link to download this software.

http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2210Utility-v1.2.3-windows-installer.zip

Mini-USB cable

I/O Peripherals - Microchip