Megger Clamp Meter, Max Current 100A ac CAT III 300 V

  • RS Stock No. 179-4710
  • Mfr. Part No. 2009-574
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The DCM305E is designed to check earth leakage currents, however the upper range enables TRMS AC current measurements of up to 100 A. TRMS meters can measure both pure, undistorted, sinusoidal AC waveforms and non-sinusoidal AC waveforms which can contain pulse trains, triangles, spikes and other ragged waves.The instrument has six ranges: 6 mA, 60 mA, 600 mA, 6 A, 60 A100 A with a minimum resolution of 0.001 mA on the 6 mA range. Either auto or manual ranging can be selected. Harmonics / electrical noise on the cables / circuit under test can give rise to incorrect readings so the DCM305E features a low pass filter (50/60 Hz) which vastly improves measurements on these particular circuits.

0.001 mA resolution
Up to 100 A AC
TRMS reading
Low pass filter to aid stability of readings
Auto, data & peak hold
40 mm jaw

Attribute Value
Absolute Maximum AC Current Measurement 100A ac
AC Current Measurement Resolution 1µA
Clamp Meter Type Leakage Current Clamp
Best AC Current Accuracy ±(1% rdg + 8dgts)
Maximum Operating Temperature +50°C
Length 78mm
Display Type Backlight
Power Source Battery
True RMS Yes
Functions Measured AC Current, True RMS
Jaw Capacity Busbars 40mm
Dimensions 78 x 42 x 203mm
Maximum Conductor Size 750mm
Safety Category Level CAT III
Battery Life 60 h
Minimum Operating Temperature 0°C
Battery Type AAA
Width 42mm
Height 203mm
Safety Category CAT III 300 V
Safety Category Voltage 300V
Weight 300g
7 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 14,741.00
(exc. VAT)
PHP 16,509.92
(inc. VAT)
Per Unit
1 +
Related Products
Digital AC and DC clamp meter with True-RMS ...
Digital AC and DC clamp meter with True-RMS reading, Dual hall sensor and a Nickel-Steel alloy jaw mechanism. True-RMS reading4000 Count digital displayAuto-rangingDual hall sensorNickel-Steel alloy jaw mechanismAC-DC 300 AAC-DC 600 V0.5% basic DC Voltage accuracy1.5% basic AC Voltage accuracy1.0% ...
Designed to verify the presence of load current, ...
Designed to verify the presence of load current, voltage and resistence, etc.The small bodies and jaws fit perfectly in your hand and a large backlit display is easy to read.Test lead mA range with high 1 mA resolution for HVAC ...
The FLIR CM46 clamp meter is designed for ...
The FLIR CM46 clamp meter is designed for commercial and residential electricians. Featuring both AC/DC measurement, the meter is equipped with a bright backlit display for use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...