제조사부품번호

Infineon Bridge Rectifier, 40 V 2 A, 4-Pin Single

RS 제품 번호:: 826-9370
Distrelec 제품 번호:: 304-44-406
제조사 부품 번호:: BAS4002ARPPE6327HTSA1
제조업체:: Infineon

Infineon Bridge Rectifier, 40 V 2 A, 4-Pin Single

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 100 units)*

₩57,000.00

일시적 품절

2027년 8월 12일 부터 6,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
100 - 700	₩570.00	₩57,000.00
800 - 1400	₩560.00	₩56,020.00
1500 +	₩550.00	₩55,000.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 826-9370
Distrelec 제품 번호:: 304-44-406
제조사 부품 번호:: BAS4002ARPPE6327HTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	Bridge Rectifier
	Peak Reverse Repetitive Voltage Vrrm	40V
	Mount Type	Surface
	Number of Phases	1
	Package Type	SOT-143
	Pin Count	4
	Configuration	Single
	Maximum Operating Temperature	150°C
	Minimum Operating Temperature	-65°C
	Peak Non-Repetitive Forward Surge Current Ifsm	2A
	Forward Current If	200mA
	Peak Forward Voltage Vf	790mV
	Height	0.9mm
	Peak Reverse Current Ir	10μA
	Length	2.9mm
	Width	1.3mm
	Standards/Approvals	No
	Series	BAS4002A
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Product Type Bridge Rectifier
	Peak Reverse Repetitive Voltage Vrrm 40V
	Mount Type Surface
	Number of Phases 1
	Package Type SOT-143
	Pin Count 4
	Configuration Single
	Maximum Operating Temperature 150°C
	Minimum Operating Temperature -65°C
	Peak Non-Repetitive Forward Surge Current Ifsm 2A
	Forward Current If 200mA
	Peak Forward Voltage Vf 790mV
	Height 0.9mm
	Peak Reverse Current Ir 10μA
	Length 2.9mm
	Width 1.3mm
	Standards/Approvals No
	Series BAS4002A
	Automotive Standard AEC-Q101

Infineon BAS4002A Series Bridge Rectifier, 200mA Forward Current, 40V Peak Reverse Repetitive Voltage - BAS4002ARPPE6327HTSA1

This bridge rectifier converts alternating input to a unidirectional output for single-phase circuits in compact surface-mount applications. It is designed for use across a wide temperature span and targets electronic assemblies requiring a small footprint and automotive-grade robustness.

Features and Benefits:

• 200mA forward current supports low-power rectification requirements
• 40V peak reverse voltage protects against moderate reverse stress
• 0.79V typical forward voltage reduces conduction losses
• 10μA peak reverse leakage minimises standby current draw
• 2A non-repetitive surge capacity handles short-term inrush events
• Automotive-grade AEC-Q101 qualification suits vehicle electronics environments

Applications

• Suitable for battery-charging circuits in small devices
• Ideal for power-supply front-ends in automotive modules
• Used with signal-conditioning circuits requiring low leakage
• Can be used for diode-bridge implementation on compact PCBs
• Used for transient-prone circuits needing surge tolerance

What package should I design for when placing this component?

The device comes in a SOT-143 package and is intended for surface-mount placement on standard board finishes.

How many external pins must be routed for connection?

There are four pins to route, corresponding to the bridge-configuration terminals.

What ambient temperatures can this component operate within?

It is specified to function from -65°C up to 150°C, suitable for elevated-temperature environments.

How does it perform under brief overcurrent events?

The part can withstand a single non-repetitive forward surge current of up to 2A to cope with transient inrush conditions.