RS PRO 6 bar Blow Gun, 1/4 in Air Inlet (BSP)

RS PRO is proud to introduce this superb blow gun, created to extract chips from blind holes with depths of up to 450 mm. This deep-hole vacuum gun features a plastic probe that propels high-pressure air into gaps and holes, effectively dislodging particles. The primary nozzle then securely captures and removes the dislodged particles. Notably, the nozzle is enclosed to prevent any escaped particles, ensuring safety by minimizing the risk of injury.

To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.

These non-restricted type blow guns must only used on air lines which have a pressure regulator set at a maximum of 30 psi.