INA Bearing Insert 12 mm ID 40 mm OD GRAE12-XL-NPP-B
- RS Stock No.:
- 194-6887
- Mfr. Part No.:
- GRAE12-XL-NPP-B
- Manufacturer:
- INA
This image is representative of the product range
Subtotal (1 unit)*
PHP1,760.02
(exc. VAT)
PHP1,971.22
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Temporarily out of stock
- Shipping from April 01, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | PHP1,760.02 |
*price indicative
- RS Stock No.:
- 194-6887
- Mfr. Part No.:
- GRAE12-XL-NPP-B
- Manufacturer:
- INA
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 12 mm | |
| Outside Diameter | 40 mm | |
| Static Load Rating | 10.1kN | |
| Dynamic Load Rating | 4.75kN | |
| Series | GE | |
| Bore Type | Round | |
| Standards/Approvals | No | |
| Overall Width | 28.6mm | |
| Select all | ||
|---|---|---|
Brand INA | ||
Product Type Bearing Insert | ||
Inside Diameter 12 mm | ||
Outside Diameter 40 mm | ||
Static Load Rating 10.1kN | ||
Dynamic Load Rating 4.75kN | ||
Series GE | ||
Bore Type Round | ||
Standards/Approvals No | ||
Overall Width 28.6mm | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Related links
- INA Bearing Unit Insert 12 mm ID 40 mm OD RAE12-XL-NPP-FA106
- INA Bearing Insert 17 mm ID 40 mm OD GRAE17-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-B
- INA Bearing Unit Insert 15 mm ID 40 mm OD GRAE15-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD GAY40-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD GRAE40-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-FA106