Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported

Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly

Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques

Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported

Damping of running noise is required

Units	Per Unit
1 - 12	PHP4,003.71
13 - 24	PHP3,883.60
25 +	PHP3,767.08

Select all	Attribute	Value
	Brand	INA
	Product Type	Bearing Insert
	Inside Diameter	30 mm
	Outside Diameter	62 mm
	Static Load Rating	20.7kN
	Dynamic Load Rating	11.3kN
	Overall Width	36.5mm
	Standards/Approvals	No
	Bore Type	Round
	Series	GE

	Select all
	Brand INA
	Product Type Bearing Insert
	Inside Diameter 30 mm
	Outside Diameter 62 mm
	Static Load Rating 20.7kN
	Dynamic Load Rating 11.3kN
	Overall Width 36.5mm
	Standards/Approvals No
	Bore Type Round
	Series GE

INA Bearing Insert 30 mm ID 62 mm OD GLE30-XL-KRR-B

FREE delivery for orders over ₱3,000.00

Related links