Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported

Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly

Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques

Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported

Damping of running noise is required

Units	Per Unit
1 - 12	PHP3,396.14
13 - 24	PHP3,294.26
25 +	PHP3,195.42

Select all	Attribute	Value
	Brand	INA
	Product Type	Bearing Insert
	Inside Diameter	25 mm
	Outside Diameter	52 mm
	Static Load Rating	14.9kN
	Dynamic Load Rating	7.8kN
	Standards/Approvals	No
	Bore Type	Round
	Overall Width	42.9mm
	Series	GE

	Select all
	Brand INA
	Product Type Bearing Insert
	Inside Diameter 25 mm
	Outside Diameter 52 mm
	Static Load Rating 14.9kN
	Dynamic Load Rating 7.8kN
	Standards/Approvals No
	Bore Type Round
	Overall Width 42.9mm
	Series GE

INA Bearing Insert 25 mm ID 52 mm OD GLE25-XL-KRR-B

FREE delivery for orders over ₱3,000.00

Related links